User`s guide

1 Introduction

Preparing the U3606B

6 U3606B User’s Guide

NOTE

• For subsequent power cycles, the U3606B returns to the last power-off state by

default. You can change this behavior in the Utility menu.

• If the self-test is unsuccessful, Error is displayed on the right side of the display. Press

[Shift] > [Utility] to read the error number in the Utility menu.

• A more extensive self-test is also available from the Utility menu.

Push the power switch to turn on the instrument.

The front-panel display illuminates while the U3606B

performs its power-on self-test.

DC voltage measurement

Constant voltage operation

Output on standby

Autoranging enabled

The image above shows the U3606B state after the initial power-up.

• DC voltage measurement function with autoranging enabled, and

• Constant voltage (CV) operation with the output disabled (on standby).

U3606-90054_UG_EN.book Page 6 Friday, July 11, 2014 5:12 PM