User`s guide

Characteristics and Specifications 5
Digital Multimeter Specifications
U3606B User’s Guide 161
Capacitance
[7]
1.000 nF 0.001 nF
0.75 µA
current
source
- - 2.0 + 0.8 0.02 + 0.001
10.00 nF 0.01 nF 0.75 µA - - 1.0 + 0.5 0.02 + 0.001
100.00 nF 0.1 nF 8.3µA - - 1.0 + 0.5 0.02 + 0.001
1.000 µF 0.001 μF 83 µA - - 1.0 + 0.5 0.02 + 0.001
10.00 µF 0.01 μF 83 µA - - 1.0 + 0.5 0.02 + 0.001
100.0 µF 0.1 μF 83 µA - - 1.0 + 0.5 0.02 + 0.001
1000 µF 1 μF 0.83 mA - - 1.0 + 0.5 0.02 + 0.001
10000 µF 1 μF 0.83 mA - - 2.0 + 0.5 0.02 + 0.001
[1] 20% over range on all ranges, except for 20 mV
dc
, 1000 V
dc
, and 3 A
dc
range.
[2] Relative to calibration standards.
[3] Any current measurement greater than 500 mA will have a temporary thermo-effect. If you wish to measure a lower current
or offset current immediately after a high current measurement, ensure that the U3606B has cooled down.
[4] Specifications stated are for 2-wire resistance measurements using the Null math operation. Without Null, add a 0.2 Ω error.
To eliminate the noise interference, which might be induced due to the test leads, a shielded test cable is recommended for
measuring resistance above 100 kΩ.
Table 5 - 1 DC accuracy specifications ± (% of reading + % of range) (continued)
Function Range
[1]
Resolution Test current
or burden
voltage
24 Hours
[2]
23 ºC ± 1 ºC
90 Days
23 ºC ± 5 ºC
1 Year
23 ºC ± 5 ºC
Temperature
coefficient
0 ºC to 18 ºC
28 ºC to 55 ºC
U3606-90054_UG_EN.book Page 161 Friday, July 11, 2014 5:12 PM