User`s guide

System-Related Operation 4
Utility Menu Items
U3606B User’s Guide 141
Press [] or [] to switch between “YES” and “no”. Select
“YES” to enable the output protection state or “no” to
disable the output protection state.
Adjusting the soft start output
The U3606B allows you the option of soft starting the DC
power supply output. You can select a value from 1 to 10000
steps for the soft start output. This feature is useful to start
a DC motor. The factory default soft start step value is 1.
Press [] or [] to change the soft start step value (1 to
10000).
NOTE
For a successful fast starting DC motor (1 step), you must first disable the
output protection (page 140) and change the constant voltage range to
S1S2 (autoranging). Selecting longer rising steps such as 30 to 50 steps
can reduce the starting current of the DC motor.
U3606-90054_UG_EN.book Page 141 Friday, July 11, 2014 5:12 PM