User`s guide

4 System-Related Operation
Utility Menu Items
132 U3606B User’s Guide
Enabling refresh hold
Press [] or [] to change the refresh hold variation (001%
to 100%).
Press [] or [] until the cursor is position on the refresh
hold threshold (nH - N.N%). Press [] or [] to change the
refresh hold threshold (0.0% to 9.9%) for voltage, current,
and capacitance measurements.
NOTE
• If the variation of the measured value exceeds the preset percentage,
the refresh hold will be ready to trigger.
• For voltage, current, and capacitance measurements, the reading value
will not be updated when the reading falls below the threshold value.
U3606-90054_UG_EN.book Page 132 Friday, July 11, 2014 5:12 PM