User`s guide

System-Related Operation 4
Utility Menu Items
U3606B User’s Guide 131
Recording measurement data (data logging)
Press [] or [] to switch between “StoP”, “Cont”, or
“StArt”.
Select “StArt” to start the data logging operation, select
“StoP” to stop the data logging operation, and select “Cont”
to resume a data logging operation from where it was last
stopped.
If “StArt” is selected, the U3606B will exit the Utility menu
immediately and begin the data logging operation. The LOG
annunciator turns on for the entire duration of the data
logging operation.
NOTE
• Selecting “StArt” overwrites any previously stored data. After the data
logging operation has started, you will need to press [Local] if you
want to stop the data logging operation.
• The data logging operation will stop automatically when it is completed
or when the U3606B’s memory is full.
• To download the stored data, you will need to connect a PC to the
U3606B via remote operation. See the U3606B Programmer’s
Reference for more details.
U3606-90054_UG_EN.book Page 131 Friday, July 11, 2014 5:12 PM