User`s guide

4 System-Related Operation
Utility Menu Items
130 U3606B User’s Guide
Press [] again to read the remaining errors. The error
queue is automatically cleared when all errors have been
read (primary display shows “nonE”).
Configuring the data logging parameters
The data logging function provides you the convenience of
recording test data for future review or analysis. Since data
is stored in the non- volatile memory, the data remains saved
even when the U3606B is turned OFF.
The data logging feature collects measurement information
over a user- specified duration.
Press [] or [] to change the data logging loop number
(1 to 29000).
Press [] or [] until the cursor is position on the data
logging interval. Press [] or [] to change the data logging
interval (1 to 99999 s).
NOTE
• You can record up to 28800 data (8 hours × 60 minutes × 60 seconds).
• The data logging operation will stop automatically when it is completed
or when the U3606B’s memory is full.
U3606-90054_UG_EN.book Page 130 Friday, July 11, 2014 5:12 PM