User`s guide

3 DC Power Supply Operation
Sweep Functions
112 U3606B User’s Guide
NOTE
• The scan dwell time also affects the first step at amplitude 0. An initial
delay, the length of the preset scan dwell time, is expected for each
complete scan signal sweep.
• If you want to adjust the scan signal parameters, press [Shift] >
[Utility] to access the Utility menu.
• The maximum amplitude end position will be limited by the range and
function (CV or CC) selected.
U3606-90054_UG_EN.book Page 112 Friday, July 11, 2014 5:12 PM