User`s guide

DC Power Supply Operation 3
Square-Wave Operation
U3606B User’s Guide 103
Adjust the amplitude, duty cycle, and pulse width values
Adjust the amplitude value and save the changes
Press [] again to cycle between amplitude, duty cycle,
or pulse width values.
1
Use the arrow keys to change the value.
• Press [] or [] to select a digit position or range.
• Press [] or [] to increase or decrease the value selected.
Note: If the annunciator is not flashing, press [] again.
2
To exit the edit mode
3
U3606-90054_UG_EN.book Page 103 Friday, July 11, 2014 5:12 PM