User`s guide

DC Power Supply Operation 3
Constant Current Operation
U3606B User’s Guide 85
Enable the output
8
NOTE
• The output current is limited by the range selected. Press [Shift] >
[Range] to select an appropriate range. You can only select a range
when the output is disabled (the SBY annunciator is illuminated).
• While adjusting the constant current value, you can also press
[Current] again or [Shift] > [Exit] to exit the edit mode.
U3606-90054_UG_EN.book Page 85 Friday, July 11, 2014 5:12 PM