User`s guide

3 DC Power Supply Operation
Constant Current Operation
84 U3606B User’s Guide
Select the constant current function
Adjust the constant current value
5
LOAD
4
The CC annunciator will turn on according to your selection.
Use the arrow keys to change the value.
• Press [] or [] to select a digit position or range.
• Press [] or [] to increase or decrease the value selected.
Note: If the CC annunciator is not flashing, press [Current] again. The output current
can be programmed when the output is enabled (OUT) or disabled (SBY).
6
To exit the edit mode
7
U3606-90054_UG_EN.book Page 84 Friday, July 11, 2014 5:12 PM