Technical data

24 U3606A Quick Start Guide
10 Use the directional keys to select a suitable OVP value.
11 Press Shift > Save or Voltage (Protect) again to save and exit the edit
mode.
12 Press OUT|SBY to enable the constant current output.
13 If the load attempts to draw more voltage than required, such that it
exceeds the programmed protection value, the over- voltage protection
circuit will protect the load by disabling the output.
NOTE
For complete instructions on all source operations and output functions,
see Chapter 3, “DC Power Supply Operation” in the U3606A User’s and
Service Guide.