Technical data

U3606A Quick Start Guide III
Safety Symbols
The following symbols on the instrument and in the documentation indicate precautions
which must be taken to maintain safe operation of the instrument.
Environmental Conditions
This instrument is designed for indoor use and in an area with low condensation. The table
below shows the general environmental requirements for this instrument.
Direct current (DC) Alternating current (AC)
Both direct and alternating current
Caution, risk of danger (refer to this manual
for specific Warning or Caution information)
Environmental conditions Requirements
Operating temperature 0 °C to 55 °C
Storage temperature –40 °C to 70 °C
Relative humidity Up to 80% at 30 °C RH (non-condensing)
NOTE
The U3606A Multimeter|DC Power Supply complies with the following safety and
EMC requirements:
• IEC 61010-1:2001/EN61010-1:2001 (2nd Edition)
• Canada: CAN/CSA-C22.2 No. 61010-1-04
• USA: ANSI/UL 61010-1:2004
• IEC 61326-1:2005/EN61326-1:2006
• CISPR11:2003/EN55011:2007, Group 1 Class A
• Canada: ICES/NMB-001:2004
• Australia/New Zealand: AS/NZS CISPR 11:2004