Technical data

IV U3606B Quick Start Guide
Safety Symbols
The following symbols on the instrument and in the documentation indicate precautions
which must be taken to maintain safe operation of the instrument.
Environmental Conditions
This instrument is designed for indoor use and in an area with low condensation. The table
below shows the general environmental requirements for this instrument.
Direct current (DC) Alternating current (AC)
Both direct and alternating current
Caution, risk of danger (refer to this manual
for specific Warning or Caution information)
Environmental condition Requirement
Te m p e r a t u r e
• Operating condition
• 0 °C to 55 °C
• Storage condition
• –40 °C to 70 °C
Humidity
• Operating condition
• Up to 80% RH at 40°C (non-condensing)
• Storage condition
• Up to 95% RH at 40°C (non-condensing)
Altitude Up to 2000 m
Pollution degree 2