Specifications

U2802A Quick Start Guide III
CAUTION
• Do not load the input and output terminals above the specified operating limits. Input terminals should not
exceed ±10 V with respect to the module ground.
• Applying excessive voltage or overloading the device will cause irreversible damage to the circuitry.
• Applying excessive voltage or overloading the input terminal will damage the device permanently.
• If the device is used in a manner not specified by the manufacturer, the protection provided by the
device may be impaired.
• The U2802A can only be used with U2355A or U2356A DAQs and used with the SCSI cables provided.
• Always use dry cloth to clean the device. Do not use ethyl alcohol or any other volatile liquid to clean the
device.
• Do not permit any blockage of the ventilation holes of the device.
U2802A QSG.book Page III Tuesday, January 8, 2008 10:54 AM