Specifications

U2802A Quick Start Guide 17
F. Connect Your DAQ Device to the PC
G. Hardware Verification
H. Connect Your U2802A to DAQ
1 Connect U2802A to U2355/56A DAQ using two 68- pin SCSI cables.
2 Connect 12V DC power supply to the power jack on the rear panel
of the U2802A and the U2355/56A DAQ with the bundled power
supply splitter.
3 Power on U2355A or U2356A DAQ.
NOTE
Refer to Agilent U2300A Series USB Multifunction Data Acquisition Devices User’s Guide
for “Connect Your DAQ Device to PC” procedure.
The bundled power supply splitter in U2802A is used to allow powering both the U2802 and
U2355/56A DAQ with a single DC power adapter which has been supplied with the DAQ.
NOTE
Refer to Agilent U2300A Series USB Multifunction Data Acquisition Devices User’s Guide
for “Hardware Verification” procedure.
U2802A QSG.book Page 17 Tuesday, January 8, 2008 10:54 AM