Specifications

II U2802A Quick Start Guide
Safety Information
This 31-channel thermocouple input device is safety-certified in compliance with:
• IEC 61326:2002 / EN 61326:1997+A1:1998+A2:2001+A3:2003
• CISPR 11: 1990/EN55011:1990 [Radiated emission]
• CANADA: ICES-001: 2004
• Australia/New Zealand: AS/NZS CISPR11:2004
WARNING
A WARNING notice denotes a hazard. It calls attention to an operating procedure, practice, or the like that, if
not correctly performed or adhered to, could result in personal injury or death. Do not proceed beyond a
WARNING notice until the indicated conditions are fully understood and met.
CAUTION
A CAUTION notice denotes a hazard. It calls attention to an operating procedure, practice, or the like that, if not
correctly performed or adhered to, could result in damage to the product or loss of important data. Do not proceed
beyond a CAUTION notice until the indicated conditions are fully understood and met.
WARNING
• Do not use the device if it is damaged. Before you use the device, inspect the case. Look for cracks or missing
plastic. Do not operate the device around explosive gas, vapor or dust.
• Do not apply more than the rated voltage between terminals, or between terminal and external ground.
• Always use the device with the cables provided.
• Observe all markings on the device before connecting to the device.
• Turn off the device and application system power before connecting to the I/O terminals.
• When servicing the device, use only specified replacement parts.
• Do not operate the device with the removable cover removed or loosened.
• Do not connect any cables and terminal block prior to performing self-test process.
• Use only the power adapter supplied by the manufacturer to avoid any unexpected hazards.
U2802A QSG.book Page II Tuesday, January 8, 2008 10:54 AM