Specifications

U2802A Quick Start Guide 13
E. Install the Agilent Measurement Manager
1 Verify that you have the hardware driver installed. If not, close all
other applications on your PC and insert the Product Reference
CD- ROM into your CD-ROM drive.
2 Click Measurement Manager on the Agilent Modular Products
Installation Menu to begin the installation.
3 If the installation menu does not appear after a few seconds, go to
Start > Run and type <drive>:\Application\Modular
Instruments Measurement Manager\setup.exe, where drive
is your CD-ROM drive.
4 Click OK to begin installation.
NOTE
Make sure Agilent Measurement Manager version 1.4 and above is installed
before U2802A is used.
U2802A QSG.book Page 13 Tuesday, January 8, 2008 10:54 AM