Specifications

12 U2802A Quick Start Guide
1 Disconnect any USB DAQ device that is connected to your PC and
close all other applications on your PC.
2 Insert the Agilent Automation- Ready CD into your CD- ROM drive,
and follow the instructions on your screen.
3 If the installation does not start automatically, go to Start > Run (on
the Windows start menu) and type <drive>:\autorun\auto.exe
where drive is your CD-ROM drive.
4 If you obtain the Agilent IO Libraries Suite from the web, save the
self- extracting zip file (*.exe) to any location on your hard disk.
5 Double- click the installation file to launch the installation.
6 Follow the instructions on your screen to proceed with the
installation.
7 After the installation is completed, you will see the IO Control icon
on the Windows taskbar notification area as shown below.
D. Install the DAQ Hardware Driver
NOTE
For detailed installation instructions, refer to the Agilent IO Libraries Suite
Getting Started Guide at http://www.agilent.com/find/iolib.
NOTE
Refer to Agilent U2300A Series USB Multifunction Data Acquisition Devices
User’s Guide for DAQ hardware driver installation procedure.
U2802A QSG.book Page 12 Tuesday, January 8, 2008 10:54 AM