Specifications

U2802A Quick Start Guide 11
i. If Agilent IO Libraries Suite version 14.1 or lower has been pre-installed
If you have Agilent IO Libraries Suite version 14.1 or lower installed
on your PC, you are required to uninstall the IO Libraries Suite.
1 To perform uninstallation, go to Start > Control Panel > Add or
Remove Programs. The Add or Remove Programs window will
appear. Select Agilent IO Libraries Suite 14.1 or lower version.
2 Click Change/Remove and select Remove when the instructions on
the screen prompted to proceed uninstalling the IO Libraries
Suite version 14.1 or lower from your PC.
3 Proceed to C. Install the Agilent IO Libraries Suite Version 14.2 or Higher.
ii. If Agilent IO Libraries Suite 14.2 has been pre-installed
If you have the IO Libraries Suite 14.2 pre- installed on your PC, skip
Step C and proceed to D. Install the DAQ Hardware Driver
iii. If Agilent IO Libraries Suite is not installed
If you do not have IO Libraries Suite installed on your PC, go to C.
Install the Agilent IO Libraries Suite Version 14.2 or Higher.
C. Install the Agilent IO Libraries Suite Version 14.2 or Higher
The Agilent IO Libraries Suite 14.2 is available in the Agilent
Automation- Ready CD that comes with the standard purchase of
Agilent U2300A Series USB Multifunction Data Acquisition Devices or
U2802A 31- Channel Thermocouple Input.
NOTE
• If you do not have the Agilent Automation-Ready CD, obtain the Agilent IO Libraries
Suite 14.2 or higher at http://www.agilent.com/find/iolib.
• Ensure that you do not have any USB DAQ device connected to your PC during
installation of the Agilent IO Libraries Suite.
U2802A QSG.book Page 11 Tuesday, January 8, 2008 10:54 AM