Specifications

8 U2802A Quick Start Guide
Figure 1 U2802A installation flowchart
A. Check Your System Requirements
C. Install the Agilent IO Libraries Suite Version 14.2 or Higher
D. Install the DAQ Hardware Driver
F. Connect Your DAQ Device to the PC
H. Connect Your U2802A to DAQ
I. Launch Your Agilent Measurement Manager
B. Check Your Pre-Installed IO Libraries Suite
E. Install the Agilent Measurement Manager
G. Hardware Verification
iii. If Agilent IO Libraries Suite is not installed
ii. If Agilent IO Libraries Suite 14.2 has
been pre-installed
i. If Agilent IO Libraries Suite version 14.1 or
lower has been pre-installed
(requires uninstalling of this version)
U2802A QSG.book Page 8 Tuesday, January 8, 2008 10:54 AM