Technical data

DIAGnostic Subsystem 3
U2751A Programmer’s Reference Guide 15
DIAGnostic:RELay:CYCLes:CLEar
Syntax
DIAGnostic:RELay:CYCLes:CLEar (@<ch_list>)
This command sets the relay cycle counter of the specified channel(s) to
zero.
Parameter
Example
DIAG:REL:CYCL:CLE (@101)
Item Type Range of values Default value
<ch_list> NR1 101 through 408 N/A
NOTE
This command is used to clear the relay cycle counter when the user changes a new relay.