User`s guide

Operation and Features 2
U2741A User’s Guide 35
The following figure shows a four- wire resistance
measurement connection.
Agilent Measurement Manager operation
Select the 2-Wired Ω function and desired range for two- wire
resistance measurement. Select the 4-Wired Ω function and
desired range for four- wire resistance measurement. A
suitable range should be selected to give the best
measurement resolution. The reading is displayed and
updated continuously.
SCPI commands
The following example shows how to make a resistance
measurement using SCPI commands.
Two- wire : MEASure:RESistance?
Four- wire : MEASure:FRESistance?
Te s t Cu r re n t
User's Guide.book Page 35 Friday, August 8, 2008 9:11 AM