User`s guide

34 U2741A User’s Guide
2 Operation and Features
SCPI commands
The following example shows how to make an AC current
measurement using SCPI commands.
MEASure:CURRent:AC?
Measuring Resistance
The resistance measurement function has the following
features:
• Seven ranges to select: 100 Ω, 1 kΩ , 10 kΩ , 100 kΩ, 1
MΩ, 10 MΩ, and 100 MΩ or, auto- range.
• Supports two- wire and four- wire resistance measurement.
• Open circuit voltage is limited to less than 4.5 V on all
ranges.
The figure below shows a two- wire resistance measurement
connection.
Resistance
Te s t
Current
User's Guide.book Page 34 Friday, August 8, 2008 9:11 AM