User`s guide

14 U2741A User’s Guide
1Getting Started
4 If the menu does not launch automatically, go to Start >
Run (on the Windows Start menu) and type <drive>:\
Driver\Hardware\setup_Hw.exe where <drive>
is
your CD-ROM drive location. Click OK to begin the
installation.
5 Follow the instructions on the screen and click Next to
proceed.
6 Click Install to begin the installation. Follow the
instructions on the screen to proceed with the
installation.
7 Click Finish when the installation has completed.
D. Install the Agilent Measurement Manager
1 If you have done “C. Install the Module Driver” on
page 13, proceed to Step 2. If not, close all other
applications on your PC and insert the Product Reference
CD-ROM into your CD-ROM drive.
2 Click Measurement Manager on the U2741A Installation Menu to
begin the installation.
User's Guide.book Page 14 Friday, August 8, 2008 9:11 AM