User`s guide

Getting Started 1
U2741A User’s Guide 13
C. Install the Module Driver
1 Verify that your PC meets the minimum system
requirements as stated in “A. Check Your System” on
page 11.
2 Insert the Product Reference CD-ROM into your CD-ROM
drive.
3 The installer will automatically launch the Agilent Modular
Products Installation Menu. Click Hardware Driver to begin the
installation.
NOTE
For detailed installation instructions, refer to the Agilent IO Libraries Suite
Getting Started Guide at http://www.agilent.com/find/iolib.
NOTE
Please ensure that there are no instruments connected to the PC when
installing the driver.
User's Guide.book Page 13 Friday, August 8, 2008 9:11 AM