User`s guide

10 U2741A User’s Guide
1Getting Started
Installation and Configuration
Installation
Follow the step-by-step instructions shown in the following
flowchart to get started with the preparations and
installations of your U2741A.
NOTE
You need to install the IVI-COM driver if you are going to use the U2741A
with Agilent VEE Pro, LabVIEW, or Microsoft
®
Visual Studio
®
.
A. Check Your System
B. Install the IO Libraries Suite
C. Install the Module Driver
D. Install the Agilent Measurement Manager
E. Connect the Module to Your PC
F. Verify Your Module Connection
G. Launch Your Agilent Measurement Manager
User's Guide.book Page 10 Friday, August 8, 2008 9:11 AM