Technical data

Replacement Parts 4
U2741A USB Modular 5.5 Digits Digital Multimeter Service Guide 37
General Disassemble
This chapter provides the step- by- step guide on how to
dismantle the module and install the replacement assembly.
To reassemble the module, follow the instructions in reverse
order.
The removable assemblies include:
• Metal casing
• Rear metal casing
• Front metal casing, which is attached to the carrier board
and measurement board
• Front and rear rubber bumper
Mechanical Disassemble
Follow the instructions in this section for the instrument
disassembly process.
Step 1: Pull the rubber bumper out to unscrew the metal
casing
NOTE
The parts shown in the following figures are representative and may differ
from what you have in your module.