Agilent N9330B Handheld Cable and Antenna Tester 25 MHz to 4.
Ensure the Reliability of Your Cable and Antenna System Key measurements: Frequency domain • Return loss vs. frequency • VSWR vs. frequency • Cable loss test Distance to fault (DTF) • Return loss vs. distance • VSWR vs. distance • Fault location High accuracy power measurement • Support Agilent U2000 series USB power sensor Today, the increasing range of wireless applications provides end users on the move with faster and more diverse services.
Ensure the Reliability of Your Cable and Antenna System (continued) Tower N9330B applications: Lightning damage • Wireless service providers: Base station cable & antenna system I&M Loose connectors • Aerospace and defense: Radio and radar cable and antenna system I&M Pinched cable • Broadcasting and radio links: Cable and antenna system I&M Test port cable • Utilities, emergency and security services Signal transmission • Contractors for all the above Early identification of potential problems D
Ensure the Reliability of Your Cable and Antenna System (continued) High accuracy power measurement (option PWM) The N9330B now supports high-accuracy, USB plug-and-play power measurements when connected to an Agilent U2000 series USB power sensor. Make true average power measurements for all signal types with wide dynamic range up to 18 GHz with just the push of a button. The Agilent U2000 USB sensors require no external power supplies and with internal zeroing eliminate the need for external calibration.
Easier Operation Powerful functions: N9330B optimized usability: • Smart and fast electronic calibrator • Long battery life • Powerful post analysis PC software • Sunlight-viewable LCD • Modern USB connectivity • Multi-language UI • Rugged design for field use A fast job, well done A busy technician needs fast tester setup, quick calibration, and a straightforward, repeatable test procedure.
Easier Operation (continued) Smart, fast calibration At the start of any new test setup, a three-step calibration is necessary, using an open, a short, and a calibrated test load. The most accurate calibration method is to use mechanical calibration standards, an optional special ‘T-combo’ open/shot/load, makes it easy for use in the field. For fast and automatic calibration, you can choose the N9330B-203 electronic calibrator.
Easier Operation (continued) Store data and setup configuration When you take the tester out into the field, and have a large number of sites and installations to check, you need sufficient storage capacity for previous, historic data. The internal memory stores up to 200 traces, and you can save screen images. For fast instrument set up, you can store up to 15 stored configurations in the internal memory.
N9330B Handheld Cable and Antenna Tester 1 4 5 6 2 7 3 8 1 1. Test port, with connector protection cap. 2. Modern USB connectivity for both remote control and memory stick. Support high accuracy power measurement with Agilent U2000 USB power sensor. 3. Rapid marker positioning to measurement points using the fast-scroll rotary control. 4. The protective soft carrying case with it’s ergonomic design provides further protection for the Agilent N9330B. 5. Robust, comfortable, quick-grab hand strap. 6.
Agilent Reliable Field Use Testing in the field means working in remote locations and out in the open: sometimes carrying test equipment up towers, or possibly working in small, cramped buildings with no direct access to AC power on site. You may have to test: • Under temperature extremes • In bright sunlight or in the dark • In poor weather conditions None of these is the best operating environment for precision electronic test equipment. Agilent designed the N9330B cable and antenna tester.
Low-cost, with Agilent worldwide support Superior battery performance Based on customer inputs, Agilent understands that good battery life is essential for remote, on-site testing. There is often no convenient conventional AC power line connection available at remote BTS or antenna sites. Agilent N9330B incorporates advanced battery pack technology with intelligent charging technology, to provide you with up to four hours of continuous use.
N9330B Handheld Cable and Antenna Tester Specifications Test functions Frequency range Frequency resolution Output power Measurement speed Number of data points Return loss Return loss SWR Cable loss Distance-to-fault (DTF) 25 MHz to 4.0 GHz 100 KHz 0 to –20 dBm < 2 second/screen (full span, 521 data point) (CW sweep mode) (3.0 ms/data point, typically) (Maximum): 521 (Selectable 521, 261, 131) Range Accuracy D RL Resolution 0.00 to 60.00 dB A = 20×log10 (1.1 +10 –(D-RL)/20) +0.
N9330B Handheld Cable and Antenna Tester Specifications (continued) Input and output ports RF test port Maximum input without damage USB master USB slave Type N, female, 50 Ω +25 dBm, ± 50 VDC 1 x A plug v1.1 protocol 1 x B plug v1.
N9330B Handheld Cable and Antenna Tester Specifications (continued) N9330B handheld cable and antenna tester Soft carrying case Rechargeable battery Hard transit case Phase-stable extension cable Automotive 12 V DC adaptor Electronic calibrator T-combo’ open/short/50 Ω load 13
Ordering Information Model N9330B Options 201 202 203 301 302 303 BAT BCG 1DN 1TC ADP ABA AB2 PWM Warranty Select coverage Included R-51B-001-5Z Calibration Description Connectors Precision mechanical short/open/50 Ω load, DC to 4 GHz Precision mechanical short/open/50 Ω load, DC to 4 GHz Electronic calibrator Phase-stable extension cable 1.5 m Phase-stable extension cable 1.
www.agilent.com www.agilent.com/find/n9330b myAgilent myAgilent www.agilent.com/find/myagilent A personalized view into the information most relevant to you. Three-Year Warranty For more information on Agilent Technologies’ products, applications or services, please contact your local Agilent office. The complete list is available at: www.agilent.com/find/contactus www.agilent.
