User`s guide

3Setup Options
Setup Menu Summary
54 U1731C/U1732C/U1733C User’s Guide
Setup Menu Summary
The Setup menu items are summarized in the table below.
Click the respective “Learn more” pages for more
information on each menu item.
Table 3 - 2 Setup menu item descriptions
Legend Available settings Description Learn more on:
Ai, Z, L, C, R, ESR, or DCR
Set the measurement type that the LCR meter powers up
in. Default is the auto identification (Ai) mode.
page 56
100 Hz, 120 Hz, 1 kHz,
10 kHz, or 100 kHz
Set the test frequency that the LCR meter powers up in.
Default is 1 kHz.
page 58
D, Q, or θ and P or S
Set the inductance (L) secondary parameter and
measurement mode that the LCR meter powers up in.
Default is quality factor (Q) and series (S).
page 59
D, Q, or θ and P or S
Set the capacitance (C) secondary parameter and
measurement mode that the LCR meter powers up in.
Default is dissipation factor (D) and series (S).
page 60
D, Q, or θ and P or S
Set the resistance (R) secondary parameter and
measurement mode that the LCR meter powers up in.
Default is phase angle (θ) and series (S).
page 61
FACt or USEr
Set the open/short CAL mode that the LCR meter powers
up in. Default is factory (FACt).
page 62
05° to 45
°
Set the phase angle condition for the auto identification
(Ai) mode. Default is 10
°.
page 63
Ft01 to Ft16 or Ur01 to Ur16
Set the limit category (factory or user) and set (01 to 16)
that the LCR meter powers up in. Default is Ft01.
page 65