User`s guide

1 Introduction
Your LCR Meter in Brief
18 U1731C/U1732C/U1733C User’s Guide
Display screen
The function that each display annunciator of your LCR
meter is associated to is described in this section. See also
“Measurement units” on page 21 for a list of available
measurement signs and notations.
General display annunciators
The general display annunciators of your LCR meter are
described in the table below.
Each display annunciator of the U1731C/U1732C/U1733C
display screen (shown in Figure 1- 7) is described in
Table 1- 6. Click the respective “Learn more” pages in
Table 1- 6 for more information on each annunciator.
Table 1 - 6 General annunciators
Legend Description Learn more on:
Remote control via PC indicator page 9
Equivalent series resistance indicator
Resistance measurement by direct current
indicator
LCR meter using open/short CAL settings by
factory
page 46
LCR meter using open/short CAL setting by
user
Measuring frequency of test signal is 100 Hz
page 37
Measuring frequency of test signal is 120 Hz
Measuring frequency of test signal is 1 kHz
Measuring frequency of test signal is 10 kHz
Measuring frequency of test signal is 100 kHz