Technical data

Using the Agilent GUI Data Logger
Agilent GUI Data Logger Quick Start Guide 9
4 Click Stop to stop the data logging.
5 Click Export Data to store the logged data in the PC. All
the logged data shown in the measurements table will be
saved as a .csv file.
Figure 12 Storing the logged data in the PC
6 Click Clear Table to clear all the previously logged data
shown in the measurements table.
Manual mode
The Manual mode allows the data to be transferred to the
PC manually.
Procedures:
1 In the Logging panel, select Manual in the Logging Mode
drop down list.
NOTE
In this mode, the Logging Interval and Logging Count option are disabled.