Specifications

Cursor Measurement

Use cursor function to obtain a precise and accurate measurement in

voltage and time at any desired point of a waveform. To enter cursor

mode, press and hold the Measure button. To navigate cursor in a wave-

form, use rotary switch to move the horizontal or vertical cursor and

press rotary switch to set the cursor position.

Cursor measurement display

• The delta (symbol) indicates the

difference between X1 and X2 or

between Y1 and Y2 cursors

• For X cursor, the X cursors display

the values (volts or amperes) and

time relative to the cursors trigger

point for the selected waveform

source

• For Y cursor, the Y cursors display

the values (volts or amperes) for

the selected waveform source

Cursor Menu Sub Menu Description

Cursor Function To turn off or select cursor measurement type:

X cursor: To measure any point at time base (cursor is parallel to the vertical

axis)

Y cursor: To measure any point at voltage level (cursor is parallel to the horizon-

tal axis)

Mode To select X1, X2 or X1+X2 cursor for X cursor function

To select Y1, Y2 or Y1+Y2 cursor for Y cursor function

Source To select channel 1, channel 2 or Math for cursor measurement

Table 4

Function descriptions of cursor menu

Figure 5 Y cursor measurement