Technical data

Changing the Default Settings 4
U1401A User’s and Service Guide 69
[1]
The temperature menu item will only be visible and selectable if the shifted mode is on. Press SHIFT for more than one sec-
ond to enable the temperature options.
Setting the data hold/refresh hold mode
• To enable the data hold mode (manual trigger), set this
parameter as “OFF”.
• To enable the refresh hold mode (automatic trigger), set
the variation count within the range of 100 to 1000. Once
the variation of the measured value exceeds this preset
variation count, the refresh hold mode will be ready to
trigger and update a new value.
PArtY Parity En, odd, or
nonE
Sets even, odd, or no parity check for remote
communication with a PC (remote control)
nonE
bAud Baud rate 2400 Hz,
4800 Hz,
9600 Hz,
19200 Hz
Sets baud rate for remote communication with
a PC (remote control)
9600 Hz
bLit Display backlight
timer
1 to 99 s Sets the timer for automatically turning off the
LCD display backlight
30 sec
OFF Disables the LCD display backlight from
automatically turning off
AoFF Auto power off 1 to 99 min Sets the timer for auto power off 15 min
OFF Disables auto power off
Table 4 - 1 Setup options and default settings (continued)
Menu item Available setting options Default factory
setting
Display Description Display Description