Technical data

68 U1401A User’s and Service Guide
4 Changing the Default Settings
Available Setting Options
Table 4 - 1 Setup options and default settings
Menu item Available setting options Default factory
setting
Display Description Display Description
rhoLd Data Hold/
Refresh Hold
OFF Enables data hold (manual trigger) OFF
100–1000 Sets the variation count for refresh hold (auto
trigger)
tEMP Temperature
[1]
• d-C
• d-CF
• d-F
• d-FC
Selects the temperature unit
Four combinations can be selected:
• °C only
• °C/ °F
• °F only
•
°F/ °C
d-C
bEEP Beep 4800 Hz,
2400 Hz,
1200 Hz,
600 Hz
Sets the beeper frequency 4800 Hz
OFF Disables the beeper
FrEq Minimum
frequency
measurement
0.5 Hz, 1 Hz,
2 Hz
Sets the minimum frequency that can be
measured
0.5 Hz
PECnt Percentage scale 4–20mA
0–20mA
Selects which percent scale readout is used 4-20 mA
Print Print On or OFF ON: Enables automatic and continuous
transmission of data to PC
OFF
Echo Echo On or OFF ON: Enables the return of characters to PC in
remote communication
OFF
dAtAb Data bit 8bit or 7bit
(Stop bit is
always 1bit)
Sets the data bit length for remote
communication with a PC (remote control)
8bit