Technical data

Maintenance 6
U1401A User’s and Service Guide 123
7 Throughout the fuse replacement procedures, make sure
that the knob of the rotary switch on the top case and
the rotary switch itself on the circuit board remain at the
OFF position.
8 After replacing the fuse, re- fasten the circuit board and
the bottom cover.
9 Refer to Table 6- 1 for the part number, rating, and size of
the fuses.
Table 6 - 1 Fuse specifications
Fuse Agilent part number Rating Size Ty p e
1 2110-1464 630 mA/ 250 V 5 mm x 20 mm Fast-blow ceramic-type
2 2110-1463 63 mA/ 250 V 5 mm x 20 mm Slow-blow UL/VDE