Technical data

92 U1401A User’s and Service Guide
5 Application Examples
Measuring a Pressure Transducer
To measure a pressure transducer, follow these steps:
1 Turn the rotary switch to .
2 Connect the red and black probe leads to the positive and
negative input terminals respectively.
3 Probe the test points (Figure 5- 4 on page 93) and read
the display.
Table 5 - 1 Typical pressure range and maximum output voltages of
millivolt output pressure transducers
Pressure range Maximum output voltage
0 PSIG to 5 PSIG 50 mV
0 PSIG to 15 PSIG 100 mV
0 PSIG to 30 PSIG 80 mV
0 PSIG to 60 PSIG 60 mV
0 PSIG to 100 PSIG 100 mV
0 PSIG to 150 PSIG 60 mV