User`s guide

Multimeter Setup Options 4
Setup Menu Items
U1273A/U1273AX User’s Guide 125
4 Press to save your changes (or press to
discard your changes).
5 Press and hold until the multimeter restarts to return
to normal operation.
Enabling the echo feature
When the echo feature is enabled, the multimeter echoes
(returns) all the characters it receives when it is connected
to a remote PC.
To enable the echo feature:
1 Press for more than 1 second to enter the
multimeter’s setup menu.
2 Browse to Menu 4 > ECHO, and press edit the value.
3 Use the arrow keys to enable the echo feature.
4 Press to save your changes (or press to
discard your changes).
5 Press and hold until the multimeter restarts to return
to normal operation.
Enabling the print feature
When the print feature is enabled, the multimeter will print
out the measured data when the measuring cycle is
complete. The multimeter will automatically send new data
to the remote PC host continuously. The multimeter does not
accept any commands from the PC host when this feature is
enabled.
H
z
%
m
s
L
o
g
S
h
i
f
t
V
i
e
w
E
s
c
Setup
Parameter Range Default setting
ECHO OFF or ON OFF
Setup
H
z
%
m
s
L
o
g
H
z
%
m
s
L
o
g
S
h
i
f
t
V
i
e
w
E
s
c
Setup