User`s guide

4 Multimeter Setup Options
Setup Menu Items
124 U1273A/U1273AX User’s Guide
Changing the data bits
This setting changes the number of data bits (data width)
for remote communications with a PC. The number of stop
bit is always 1, and this cannot be changed.
To change the data bit:
1 Press for more than 1 second to enter the
multimeter’s setup menu.
2 Browse to Menu 4 > DATA BIT, and press edit the
value.
3 Use the arrow keys to change the data bit.
4 Press to save your changes (or press to
discard your changes).
5 Press and hold until the multimeter restarts to return
to normal operation.
Changing the parity check
This setting changes the parity check for remote
communications with a PC.
To change the parity check:
1 Press for more than 1 second to enter the
multimeter’s setup menu.
2 Browse to Menu 4 > PARITY, and press edit the value.
3 Use the arrow keys to change the parity check.
Parameter Range Default setting
DATA BIT 8-bit or 7-bit 8
Setup
H
z
%
m
s
L
o
g
H
z
%
m
s
L
o
g
S
h
i
f
t
V
i
e
w
E
s
c
Setup
Parameter Range Default setting
PARITY NONE, EVEN, or ODD NONE
Setup
H
z
%
m
s
L
o
g