User`s guide

Multimeter Setup Options 4
Setup Menu Items
U1273A/U1273AX User’s Guide 119
To change the continuity alert:
1 Press for more than 1 second to enter the
multimeter’s setup menu.
2 Browse to Menu 2 > CONTINUITY, and press edit the
value.
3 Use the arrow keys to change the continuity alert. Select
OFF to disable the continuity alert.
4 Press to save your changes (or press to
discard your changes).
5 Press and hold until the multimeter restarts to return
to normal operation.
Changing the minimum measurable frequency
This setting is used with frequency tests (see page 81).
Changing the minimum measurable frequency will influence
the measurement rates for frequency, duty cycle, and pulse
width measurements. The typical measurement rate as
defined in the specification is based on a minimum
measurable frequency of 10 Hz.
To change the minimum measurable frequency:
1 Press for more than 1 second to enter the
multimeter’s setup menu.
2 Browse to Menu 2 > MIN-Hz, and press edit the value.
3 Use the arrow keys to change the minimum measurable
frequency.
4 Press to save your changes (or press to
discard your changes).
5 Press and hold until the multimeter restarts to return
to normal operation.
Setup
H
z
%
m
s
L
o
g
H
z
%
m
s
L
o
g
S
h
i
f
t
V
i
e
w
E
s
c
Setup
Parameter Range Default setting
MIN-Hz 0.5 Hz or 10 Hz 0.5 Hz
Setup
H
z
%
m
s
L
o
g
H
z
%
m
s
L
o
g
S
h
i
f
t
V
i
e
w
E
s
c
Setup