User`s guide

Multimeter Setup Options 4
Setup Menu Items
U1273A/U1273AX User’s Guide 113
Setup Menu Items
Changing the variation count
This setting is used with the multimeter’s AutoHold feature
(see page 96). When the variation of the measured value
exceeds the value of the variation count, the AutoHold
feature will be ready to trigger.
To change the variation count:
1 Press for more than 1 second to enter the
multimeter’s setup menu.
2 Browse to Menu 1 > AHOLD, and press edit the value.
3 Use the arrow keys to change the variation count.
4 Press to save your changes (or press to
discard your changes).
5 Press and hold until the multimeter restarts to return
to normal operation.
Changing the recording option
This setting is used with the multimeter’s Data Logging
feature (see page 97). There are three available recording
options for the multimeter’s Data Logging feature.
• HAND: Manual log
• AUTO: Interval log
• TRIG: Event log
Parameter Range Default setting
AHOLD (50 to 9999) counts 0500
Setup
H
z
%
m
s
L
o
g
H
z
%
m
s
L
o
g
S
h
i
f
t
V
i
e
w
E
s
c
Setup