User`s guide

Multimeter Setup Options 4
Setup Menu Summary
U1273A/U1273AX User’s Guide 111
MENU 4
BAUD 9600 or 19200
Set the baud rate for remote communication
with a PC (9600 or 19200).
Default is 9600.
page 11 and
page 123
DATA BIT 7 or 8
Set the data bit length for remote
communication with a PC (7-bit or 8-bit).
Default is 8-bit.
page 11 and
page 124
PARITY NONE, EVEN, or ODD
Set the parity bit for remote communication
with a PC (none, even, or odd).
Default is none.
page 11 and
page 124
ECHO OFF or ON
Set the multimeter to echoes (returns) all
the characters it receives.
Default is disabled (off).
page 11 and
page 125
PRINT OFF or ON
Set the multimeter to print out the measured
data when the measuring cycle is
completed.
Default is disabled (off).
page 11 and
page 125
MENU 5
REVISION - Displays the multimeter’s firmware revision. -
S/N -
Displays the multimeter’s serial number (for
the last eight digits).
-
V-ALERT
000.01 V to 999.99 V
(D or E)
Set the multimeter’s voltage alert value from
0.01 V to 999.99 V. You can also disable this
feature (D).
Default is disabled (030.00-D).
page 8 and
page 126
USER SCALE 0000.1 V to 1000.0 V
Set the scale conversion value from (0000.1)
to (1000.0). The scale conversion unit can be
set to V/V, A/V, or (no unit)/V.
Default is (1000.0) V/V.
page 90 and
page 127
SMOOTH
0001 to 9999
(D or E)
Set the primary display’s settling value from
0001 to 9999. You can also disable this
feature (D).
Default is disabled (0009-D).
page 13 and
page 128
Table 4- 2 Setup menu item descriptions (continued)
Menu Legend Available settings Description Learn more on: