User`s guide

Multimeter Features 3
Reviewing Previously Recorded Data (View)
U1273A/U1273AX User’s Guide 103
2 Select the desired recording category to view its entries.
i Press to jump to the first stored entry.
ii Press to jump to the last stored entry.
iii Press to view the next stored entry. The index
number increases by one.
iv Press to view the previous stored entry. The index
number decreases by one.
v Press for more than 1 second to clear all entries
for the selected log type.
3 Press for more than 1 second to exit the View
mode.
Sanitizing the Log Memories
You have the option to sanitize the log memories of your
multimeter. This operation erases the log memories of your
multimeter thoroughly. The data stored in the multimeter’s
memory will not be able to be reconstructed in any way
after the data sanitization operation.
Prior to sanitizing the log memories, ensure that all manual
(H), interval (A), or event (E) entries have been cleared (see
step v).
When all entries are cleared (H : Void, A : Void, and E : Void),
press and hold for more than 1 second.
P
e
a
k
M
a
x
M
i
n
A
u
t
o
R
a
n
g
e
Exit
Dual
Setup
H
z
%
m
s
L
o
g
S
h
i
f
t
V
i
e
w
E
s
c
S
c
a
l
e
N
u
l
l
CAUTION
The data sanitization operation may take up to 30 seconds to complete.
Do not press any keys or turn the rotary switch until the data
sanitization operation is completed.