User`s guide

Multimeter Features 3
Recording Measurement Data (Data Logging)
U1273A/U1273AX User’s Guide 99
The duration set in the multimeter’s setup will determine
how long each recording interval takes. The input signal
value at the end of each interval will be recorded and saved
into the multimeter’s memory.
Start the interval log mode
1 Press for more than 1 second to start interval log
mode.
and the log entry number are displayed at the right
of the display. Subsequent readings are automatically
recorded into the multimeter’s memory at the interval
specified in the setup menu.
Figure 3-8 Interval log display
2 Press for more than 1 second to exit the interval
log mode.
The maximum number of readings that can be stored for the
interval log is 10000 entries. When all entries are occupied,
A : FULL will be shown when is pressed.
The interval and event log share the same memory buffer.
Increased usage of the interval log entries will lead to the
decrease of the maximum entries for the event log, and vice
versa.
See the “Reviewing Previously Recorded Data (View)” section
later in this manual to review or erase the recorded entries.
H
z
%
m
s
L
o
g
H
z
%
m
s
L
o
g
H
z
%
m
s
L
o
g