User`s guide

U1251A and U1252A Quick Start Guide
Tilt Stand
Safety Information
Tilt Stand at 60°
Tilt Stand at 30°
This meter is safety-certified in compliance with
EN/IEC 61010-1:2001, UL 61010-1 Second Edition
and CAN/CSA 22.2 61010-1 Second Edition,
CAT III
1000 V/ CAT IV 600 V Overvoltage Protection,
Pollution Degree II. Use with standard or
compatible test probes.
Safety Notices
A CAUTION notice denotes a hazard. It calls
attention to an operating procedure, practice, or
the like that, if not correctly performed or
adhered to, could result in damage to the
product or loss of important data. Do not
proceed beyond a CAUTION notice until the
indicated conditions are fully understood and
met.
WARNING
A WARNING notice denotes a hazard. It calls attention
to an operating procedure, practice, or the like that, if
not correctly performed or adhered to, could result in
personal injury or death. Do not proceed beyond a
WARNING notice until the indicated conditions are
fully understood and met.
Safety Symbols
CAT III
1000 V
Category III 1000 V Overvoltage
Protection
CAT IV
600 V
Category IV 600 V Overvoltage
Protection
Double insulation
Earth ground
Caution, risk of danger
Caution, risk of electric shock
For further safety information details, refer to the Agilent U1251A and U1252A Handheld
Digital Multimeters User’s and Service Guide.
©Agilent Technologies, Inc. 2006- 2009
Fourth Edition, 09 June 2009
Agilent Technologies