Specifications

Model No. U1602B U1604B U1610A U1620A
Vertical System: Scope Channels
Bandwidth (-3 dB) 20 MHz 40 MHz 100 MHz 200 MHz
DC vertical gain accuracy 5 mV/div to 20 mV/div: ± 5% full scale
50 mV/div to 100 V/div: ± 3% full scale
±2% of full scale
Full scale is equivalent to 8 div
Acquisition: Scope Channels
Maximum sample rate 100 MSa/s per channel (50 s/div to 250 ns/div)3
200 MSa/s single channel and interleaved
(125 ns/div)4
1 GSa/s interleaved,
500 MSa/s per channel
2 GSa/s interleaved,
1 GSa/s per channel
Vertical resolution 8-bits 8-bits
Maximum record length 11.1 Kpts 125 Kpts 120 Kpts,
60 Kpts each channel
2 Mpts,
1 Mpts each channel
Vertical System: Scope Channels
Rise time <17.5 ns <8.8 ns 3.50 ns typical 1.75 ns typical
Maximum input CAT III 300 Vrms (up to 400 Hz) from terminal to
ground
CAT III 600 V (with 10:1 probe)
CAT III 300 V (direct)
Bandwith limit N/A 10 KHz and 20 MHz (selectable)
Channel-to-channel isolation N/A Yes, CAT III 600 V
Probe attentuation factors 1x, 10x, 100x 1x, 10x, 100x
Our handheld scopes are designed to be used across a wide range of applications and troubleshooting tasks. Each model come with differ-
ent specifi cations to tailor to your needs, and are safety certifi ed for safer measurements.
Oscilloscopes
Horizontal System
Range 50 ns to 50 s/div 10 ns to 50 s/div 5 ns/div to 50 s/div 2 ns/div to 50 s/div
Modes Main, XY, roll Main, zoom, XY, roll
Trigger system
Sources Channel 1 and Channel 2 Channel 1, Channel 2, External
Modes Auto, normal, single Normal, Single, Auto
Types Edge, Pattern, Pulse Width, Video Edge, Glitch, TV, Nth Edge, CAN, LIN
Auto measurements Peak-to-peak, maximum, minimum, amplitude, top,
base, +overshoot, –overshoot, preshoot, RMS, mean
and one cycle mean, Frequency, period, +width, –
width, and +duty cycle and –duty cycle on any channel.
Rise time, fall time, delay and phase shift
Delay, duty cycle (+/–), fall/rise time, frequency, period,
phase shift, T-max,
T-min, width (+/–), amplitude, average, base, crest, cycle
mean, maximum,
minimum, overshoot, peak-to-peak, preshoot, standard
deviation, top,
Vrms (AC/DC), active/apparent/reactive power, power
factor
Waveform math functions CH1 + CH2, CH1 – CH2, CH2 – CH1 CH1 + CH2, CH1 – CH2, CH2 – CH1, CH1 × CH2, CH1/
CH2, CH2/CH1, d/dt (CH1),
d/dt (CH2), ∫(CH1)dt, ∫(CH2)dt, FFT
Digital Multimeter measurement
Voltage AC/DC range 600 mV to 600 V 1000 mV to 1000 V
Resistance range 600 Ω to 60 MΩ 1000 Ω to 100 MΩ
Capacitance range 60 nF to 300 uF 1000 nF to 10 mF
Diode range 1 V 1 V
Temperature range 600 °C –50 to 1000 °C
Frequency N/A 100 Hz to 1000 KHz
AC Current range 60 A N/A
7