User`s guide
Table Of Contents
- Agilent U1231A, U1232A, and U1233A Handheld Digital Multimeter
- Table of Contents
- List of Figures
- List of Tables
- Introduction
- Making Measurements
- Multimeter Features
- Multimeter Setup Options
- Using the Setup Menu
- Setup Menu Summary
- Setup Menu Items
- Changing the variation count
- Enabling and changing the Smooth refresh rate
- Enabling and changing the voltage alert level
- Changing the beep frequency
- Changing the auto power-off (APO) timeout
- Changing the LCD backlight timeout
- Adjusting the LCD backlight intensity
- Enabling the LED flashlight timeout
- Adjusting the LED flashlight intensity
- Changing the minimum measurable frequency
- Changing the continuity test alerts
- Changing the power-on greeting tone
- Resetting the Setup items
- Changing the scale conversion value
- Enable the AC/DC mV measurement
- Enable open continuity test by default
- Changing the temperature unit
- Characteristics and Specifications
Multimeter Features 3
Making Scale Transfers (Scale)
U1231A/U1232A/U1233A User’s Guide 77
1 Press and hold while powering on the multimeter to
enable the Scale operation.
2 If successful, the annunciator is shown on the left of
the display. The multimeter automatically starts the
conversion of the selected Scale item for all voltage
measurements.
3 You can only change the selected Scale item from the
Setup menu. See “Changing the scale conversion value” on
page 96 to learn more.
4 The Scale operation is enabled until the multimeter’s
power is cycled.
Max
Min