User`s guide
Table Of Contents
- Agilent U1231A, U1232A, and U1233A Handheld Digital Multimeter
- Table of Contents
- List of Figures
- List of Tables
- Introduction
- Making Measurements
- Multimeter Features
- Multimeter Setup Options
- Using the Setup Menu
- Setup Menu Summary
- Setup Menu Items
- Changing the variation count
- Enabling and changing the Smooth refresh rate
- Enabling and changing the voltage alert level
- Changing the beep frequency
- Changing the auto power-off (APO) timeout
- Changing the LCD backlight timeout
- Adjusting the LCD backlight intensity
- Enabling the LED flashlight timeout
- Adjusting the LED flashlight intensity
- Changing the minimum measurable frequency
- Changing the continuity test alerts
- Changing the power-on greeting tone
- Resetting the Setup items
- Changing the scale conversion value
- Enable the AC/DC mV measurement
- Enable open continuity test by default
- Changing the temperature unit
- Characteristics and Specifications
Making Measurements 2
Testing for Continuity
U1231A/U1232A/U1233A User’s Guide 43
NOTE
• You can set the beeper to sound and the backlight to flash as a
continuity indication whether the circuit-under-test is less than (short)
or more than or equal to (open) the threshold resistance.
• The continuity function detects intermittent shorts and opens lasting
as short as 1 ms. A brief short or open causes the multimeter to emit a
short beep and flash.
• You can enable or disable the audible and visual alert via the Setup
menu. See “Changing the continuity test alerts” on page 93 for more
information on the audible and visual alert options.