User`s guide
Table Of Contents
- Agilent U1231A, U1232A, and U1233A Handheld Digital Multimeter
- Table of Contents
- List of Figures
- List of Tables
- Introduction
- Making Measurements
- Multimeter Features
- Multimeter Setup Options
- Using the Setup Menu
- Setup Menu Summary
- Setup Menu Items
- Changing the variation count
- Enabling and changing the Smooth refresh rate
- Enabling and changing the voltage alert level
- Changing the beep frequency
- Changing the auto power-off (APO) timeout
- Changing the LCD backlight timeout
- Adjusting the LCD backlight intensity
- Enabling the LED flashlight timeout
- Adjusting the LED flashlight intensity
- Changing the minimum measurable frequency
- Changing the continuity test alerts
- Changing the power-on greeting tone
- Resetting the Setup items
- Changing the scale conversion value
- Enable the AC/DC mV measurement
- Enable open continuity test by default
- Changing the temperature unit
- Characteristics and Specifications
Multimeter Setup Options 4
Setup Menu Items
U1231A/U1232A/U1233A User’s Guide 87
Changing the beep frequency
The multimeter’s beeper alerts users to the presence of
newly sensed values for static recordings, sensed values that
are out of tolerance or limits set, and invalid key operations.
Use this Setup item to change the driving frequency of the
beeper (either 3.2, 3.4, 3.8, or 4.2 kHz), or to disable the
beeper (–.–)
Figure 4-4 Changing the beep frequency
Parameter Range Default setting
bF (3.2, 3.4, 3.8, 4.2) kHz or –.– (off) 3.8 kHz
Pr e s s
Pr e s s
Pr e s s
Pr e s s
Pr e s s
Pr e s s
Pr e s s
Pr e s s