Technical data

Installing and Connecting the Multimeter
4 Agilent GUI Data Logger Quick Start Guide
5 Click on the Communication panel to configure the
multimeter’s communication settings.
i Select Auto (Figure 5) to allow the Agilent GUI Data
Logger to automatically search for a connected
multimeter.
ii Select Manual (Figure 5) to manually update the Agilent
GUI Data Logger’s communication settings.
Select the communication Port that your multimeter is
connected to. Clicking Update port will update the port
selections that are available on your PC.
Match the Baud Rate, Parity, and Data Bits settings
(Figure 5) to the settings of the connected multimeter.
Figure 5 Communication panel
NOTE
• For U1271A, U1272A, and U1273A models, only baud rates of 9600 and
19200 bits/second are available.
• For U1231A, U1232A, and U1233A models, the baud rate, parity, and
data bits settings are fixed to 9600 bits/second, None, and 8-bits vely.