Technical data

Square Wave Mode (for U1252A, U1253A, U1252B, and U1253B)
Agilent GUI Data Logger Quick Start Guide 15
Square Wave Mode (for U1252A, U1253A, U1252B, and U1253B)
1 Turn the rotary switch of the multimeter to the
position.
2 Click the icon to activate the square wave
mode. There are two types of operations in the Square
wave program tab (as shown in Figure 19):
• Manual
• Use Preprogrammed Table
Figure 19 Square wave program operations
The frequency, duty cycle, and pulse width values can be set
remotely from the Agilent GUI Data Logger.
When selecting Use Preprogrammed Table, use the , , and
icons to start, stop, or pause the square wave operation.
To input data into the square wave preprogrammable table,
follow the instructions below:
1 Set the frequency, duty cycle, and duration accordingly
(Figure 19).
NOTE
This option is not available for the U1231A, U1232A, U1233A, U1251A,
U1251B, U1271A, U1272A, and U1273A models.
NOTE
Pulse width setting is applicable for manual operation only.